灌水我最牛之jiuwanli水楼 [复制链接]

6.6.9.2    Presentation
-    Use the EQ style.
-    Insert one tab before the equation to center it.
The equation editor sizes and styles should be respected as shown in the following examples:

6.6.9.3    Numbering
If it is necessary to number some or all of the formulae in a 3GPP TS or 3GPP TR in order to facilitate cross-reference, arabic numbers in parentheses shall be used, beginning with 1:

Equations may be numbered sequentially throughout the document without regard to the clause numbering, e.g. first equation is equation 1 and the twentieth equation (in, say clause 7) is equation 20.
Equations may also be numbered taking account of clause or subclause numbering.
EXAMPLE 1:    First equation in clause 7 is equation 7.1, fifth equation in clause 7 is equation 7.5.

EXAMPLE 2:    First equation in subclause 7.3.2 is equation 7.3.2.1, fifth equation in subclause 7.3.2 is equation 7.3.2.5.
See also subclause 5.2.1A. For the numbering of equations in annexes see subclause 5.2.6.
-    You may use sequence fields for automatically numbering tables. See clause H.4: "Sequence numbering".
-    Insert a tab between the equation and the number to right-align the number.

6.6.10    Indication of dimensions and tolerances
Dimensions and tolerances shall be indicated in an unambiguous manner.
EXAMPLE 1:    80 mm°°25 mm°°50 mm    (not 80  25  50 mm)
EXAMPLE 2:    80 µF°°2 µF  or  (80  2) µF

EXAMPLE 3:    16 kbit/s to 64 kbit/s (not 16 to 64 kbit/s)
EXAMPLE 4:    0 °C to 10 °C (not 0 to 10 °C)
In order to avoid misunderstanding, tolerances on percentages shall be expressed in a mathematically correct form.
EXAMPLE 5:    Write "from 63°% to 67°%" to express a range.
EXAMPLE 6:    Write "(65°°2)°%" to express a centre value with tolerance.

The form "65°°2°%" shall not be used.
7    Presentation of computer language and other code
Portions of code (e.g. ASN.1, GDMO, C, C++, etc.) can be included in a 3GPP TS or 3GPP TR but should be clearly marked as such.
-    Use the PL style.

以下就是附件了

Annex A (informative):
(void)

Annex B (informative):
(void)

Annex C (normative):
Drafting and presentation of terms and definitions

C.1    General principles
C.1.1    Rules for development
Void.