灌水我最牛之jiuwanli水楼 [复制链接]

7.4    Profile exchange
A mechanism for the ME, the USIM and the network to exchange service capabilities shall be specified. The following exchange of service capabilities may occur:
-    ME services capabilities may be provided to the USIM/UICC;
-    USIM/UICC services capabilities may be provided to the ME (and thus potentially to the network);
-    network services capabilities may be provided to the USIM/UICC via the ME.

7.5    Version identification
A means for identification of the version of the USIM shall be provided.

8    Physical Characteristics
The physical characteristics shall be in accordance with the specifications in 3GPP TS 31.101 [3].

8.1    Void
8.2    Void

9    Electrical characteristics and transmission protocols
Electronic signals and transmission protocols shall be in accordance with the specifications in TS 31.101.
The electrical specifications shall at least cover the 1.8V and 3V voltage ranges as specified in 3GPP TS 31.101 [3]. Lower voltages may be added in the future. 3G terminals shall not support 5V on the ME-UICC interface. Both ME and UICC shall support operational class indication as defined in ISO/IEC 7816-3 [11].
Both ME and UICC shall support at least two voltage classes.
Both UICC and ME shall support PPS as defined in ISO/IEC 7816-3 [11] with at least the values defined in 3GPP TS 31.101 [3].

The ME shall have the capabilities of initiating a warm reset as defined in ISO/IEC 7816-3 [11]. The UICC shall support warm reset as defined in ISO/IEC 7816-3 [11].
NOTE:     The warm reset is used during a session when there is a need to restart the USIM due to internal modifications of data caused by user actions or network data downloading.
The UICC may indicate in the ATR to the warm reset that the specific mode is entered automatically, using the parameters that were used prior to the warm reset. In case of a cold reset, the UICC shall enter the negotiable mode.
In addition to the T=0 protocol which is mandatory for the UICC and the ME, the T=1 protocol shall be mandatory for the ME. It is optional for the UICC.
The speed enhancement as specified in ETSI TS 102 221 [13]shall be supported by both the ME and the UICC.

9.1    Void
10    Contents of the Elementary Files

10.1    USIM information storage requirements
The USIM shall contain information elements for 3G network operations. The USIM may contain information elements related to the subscriber, 3G services and home environment or service provider related information.
The UICC shall provide storage capability for the following:

-    UICC related information:
-    IC card identification: a number uniquely identifying the UICC and the card issuer;
-    Preferred language(s);
-    Directory of applications.

USIM related information:
-    Administrative information: indicates mode of operation of the USIM, e.g. normal, type approval;
-    USIM service table: indicates which optional services are provided by the USIM;
-    IMSI;
-    Language indication;
-    Location information;
-    Cipher key (Kc) and cipher key sequence number;
-    Access control class(es);
-    Forbidden PLMNs;
-    Ciphering Key for GPRS;
-    GPRS location information;
-    Cell Broadcast related information;
-    Emergency call codes;
-    Phone numbers (ADN, FDN, SDN);
-    Short messages and related parameters;
-    Capability and Configuration parameters;
-    Higher Priority PLMN search period;
-    list of carrier frequencies to be used for cell selection.